Compact measurement modules
Acquire signals with high precision on site
Using the ibaPADU (Parallel Analog Digital Unit) device family, analog and digital signals can be acquired and recorded with high precision by the data acquisition system ibaPDA. Fast and synchronous sampling of all signals allows detailed analyzing of all processes.
Compact Measurement Modules at a Glance
- Sampling rates from 1 kHz to 100 kHz, depending on the device
- Simultaneous data acquisition due to one A/D converter per channel, 16 bit resolution
- Adjustable level and input characteristics
- Each channel galvanically isolated
- Integrated filters reduce disturbances
Product Highlights
Anti-aliasing filters reduce disturbances
A digital filter can be activated per channel together with an analog anti-aliasing filter. The digital anti-aliasing filter is adjusted automatically to the configured sampling rate.
Comfortable configuration in ibaPDA
The signals are converted internally and are available via the FO interface. The signals can be conveniently selected and configured with ibaPDA. All necessary parameters like input signal range, input impedance, or filters can be adjusted for each channel in the software.
Inputs for current and voltage signals
ibaPADU is a device family for measurement of analog and digital signals. The analog inputs are available as current and voltage inputs with different measuring ranges. Each channel is galvanically isolated and equipped with its own A/D converter.
Additional Connection
Each device has an additional RJ11-jack for the connection to a notebook with an ibaCom-PCMCIA-F card. Thus, it is possible to carry out measurements in parallel at the RJ11-jack without affecting the data transmission on the fiber optic cable.
Analog low-pass filter
An analog low-pass filter is permanently active in both devices ibaPADU-8AI-U and ibaPADU-8AI-I. In the voltage module ibaPADU-8AI-U, an additional digital low-pass filter can be activated as option.
With the 3Mbit protocol up to 1 kHz
The devices ibaPADU-8AI-U and ibaPADU-8AI-I work with the 3Mbit protocol. Thus, up to 8 devices can be linked in a daisy-chain on the fiber optics link and up to 64 analog and 64 digital signals can be transmitted at a fixed sampling rate of 1 Hz. The possible distance between two devices may be up to 2 km.
Flexible settings with "Flex" protocol
The devices ibaPADU-4-AI-U, ibaPADU-D-8AI-U and ibaPADU-D-8AI-I work with the 32Mbit Flex protocol. With 32Mbit Flex, the data transmission rate is 32Mbit/s and up to 15 "Flex" devices can be connected to a ring topology.
Different device modes
which provide the device specific properties of the previous devices like measuring range, input impedance and filters, are set by means of a rotary switch.
Overview Compact Measurement Modules
Device | Input signal range (adjustable) | Sampling rate | Input impedance | Inputs/outputs | ibaNet protocol |
---|---|---|---|---|---|
ibaPADU-4-AI-U | ±250 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V, ±24 V | up to 100 kHz | 100 kΩ | 4 AI | 32Mbit Flex |
ibaPADU-D-8AI-U | ±2.5 V, ±10 V, ±24 V, ±60 V | up to 40 kHz | 100 kΩ or 1 MΩ | 8 AI + 8 DI | 32Mbit Flex |
ibaPADU-8AI-U | ±10 V, ±24 V, ±60 V | 1 kHz | 100 kΩ or 1 MΩ | 8 AI + 8 DI | 3Mbit |
ibaPADU-D-8AI-I | ±20 mA, 0..20 mA, 4..20 mA | up to 40 kHz | 50 Ω | 8 AI + 8 DI | 32Mbit Flex |
ibaPADU-8AI-I | ±20 mA | 1 kHz | 50 Ω | 8 AI + 8 DI | 3Mbit |
AI: analog input, DI: digital input |
ibaPADU-8
Input module with 8 digital and 8 analog voltage inputs
- Sampling rate 1 kHz
- Simultaneous data acquisition due to one A/D converter per channel, 16 bit resolution
- ibaNet protocol 3Mbit
- Up to 8 devices can be cascaded using fiber optics
ibaPADU-8AI-U
- 8 digital and 8 analog voltage inputs
- Input level ±10 V, ±24 V or ±60 V
- Input impedance 100 kΩ or 1 MΩ
- Filter: RC low-pass 4 kHz (permanent); digital antialiasing and digital low-pass filter(optional, depending on device mode)
ibaPADU-8AI-I
- 8 digital and 8 analog current inputs
- Input level ±20 mA
- Input impedance 50 Ω
- Filter: RC low-pass 4 kHz (permanent)
ibaPADU-D-8
Input module with 8 digital inputs and 8 analog current inputs for ibaNet 32 Mbit flex
- Inputs galvanically isolated, single ended
- Sampling rate up to 40 kHz, freely adjustable
- Simultaneous data acquisition due to one A/D converter per channel, 16 bit resolution
- Filter: RC low-pass 40 kHz (permanent); analog and digital Antialiasing filter (in addition)
- Debouncing filter for digital inputs (in addition)
- ibaNet protocol 32Mbit Flex
- Up to 15 devices can be connected to a ring topology
ibaPADU-D-8AI-I
- 8 digital inputs and 8 analog current inputs
- Input level ±20 mA, 0..20 mA, 4..20 mA
- Input impedance 50 Ω
ibaPADU-D-8AI-U
- 8 digital inputs and 8 analog voltage inputs
- Input level ±2.5 V, ±10 V, ±24 V or ±60 V
- Input impedance 100 kΩ or 1 MΩ
ibaPADU-4-AI-U
Compact device for acquisition and recording of fast analog signals
- 4 electrically isolated analog inputs
- Input signal level ±250 mV; ±500 mV; ±1 V; ±2.5 V; ±5 V; ±10 V; ±24 V can be adjusted for each channel
- 16 bit resolution
- Sampling rate of 100 kHz max., freely adjustable in a point-to-point connection
- Real parallel measured value acquisition by an A/D converter per channel
- Antialiasing filters can be activated
- ibaNet protocol 32Mbit Flex
ibaPADU-C - Mobile Data Acquisition Unit
ibaPADU-C is a grid independent measurement module for mobile data acquisition and recording. Using the easy-to-handle, compact device analog and digital signals can be recorded just where they arise.
Success Stories
The modern Classic of Data Acquisition
As the central core of the iba system, ibaPDA has proven itself as one of the most versatile data acquisition systems for maintenance and production for many years. Among the many powerful features of ibaPDA are asset-agnostic acquisition, high-speed synchronous archiving, and real-time streaming analytics.
Resources
Please contact your local sales partner for details.
Order no. | Name | Description |
---|---|---|
10.100000 | ibaPADU-8AI-U | Process coupling: Analog and digital inputs 8A+8D inputs,+/-10V .. +/- 60V,16Bit ADCs, 1kHz |
10.100010 | ibaPADU-8AI-I | Process coupling: Analog and digital inputs 8A+8D inputs,+/-20mA,16Bit ADCs, 1kHz |
10.100100 | ibaPADU-D-8AI-U | Process coupling: Analog and digital inputs 8A+8D inputs,+/-2.5 V .. +/-60 V,16Bit ADCs, max. 40kHz |
10.100110 | ibaPADU-D-8AI-I | Process coupling: Analog and digital inputs 8A+8D inputs,+/-20mA,16Bit ADCs, max. 40kHz |
10.121000 | ibaPADU-4-AI-U | Process coupling: Analog Input 4 AI,+/-250m |